Social Media

How did boiler workers get exposed to asbestos?

How did boiler workers get exposed to asbestos?

(For instance, cement millboard often covered the ceiling space above the boiler.) Ventilation in the room was often poor, and asbestos dust was able to circulate long after it was released from the boilers. This further increased the workers’ risk of prolonged high-volume exposure.

What should I use to clean my asbestos work area?

Where required, use damp rags and/or an asbestos vacuum cleaner to clean the asbestos work area. Place debris, used rags, plastic sheeting and other waste in labelled asbestos waste bags/containers. Wet-wipe the external surfaces of the asbestos waste bags/containers to remove any adhering dust before they are removed from the asbestos work area.

What did boiler workers use to repair boilers?

They would then install these rounds using techniques that created even more asbestos dust. When repairing broken boilers, workers often used asbestos-containing products to put parts back into place. For instance, they would wrap asbestos tape around loose insulation, or apply joint compounds to small cracks.

How often do you need a licensed asbestos contractor?

Work with AIB can easily release asbestos fibres. Because of this, work on any AIB material lasting more than two hours from start to finish, even if different tradespeople are sharing the work, needs a licensed asbestos contractor. No one tradesperson should work with AIB materials for more than one hour a week.

Is it safe to work on a boiler with asbestos?

But work on the boiler may require disturbing the insulating material, presenting a risk of asbestos exposure.

Why are boiler workers at risk for mesothelioma?

Boiler workers that were active in the decades before asbestos bans are at greatest risk of developing illnesses like mesothelioma. This increased risk is due to to asbestos exposure. In fabricating boilers using asbestos, working in boiler rooms to operate or repair boilers, and working near boilers could cause exposure.

They would then install these rounds using techniques that created even more asbestos dust. When repairing broken boilers, workers often used asbestos-containing products to put parts back into place. For instance, they would wrap asbestos tape around loose insulation, or apply joint compounds to small cracks.

What are the dangers of working in a boiler room?

This increased risk is due to to asbestos exposure. In fabricating boilers using asbestos, working in boiler rooms to operate or repair boilers, and working near boilers could cause exposure. Older workers were only diagnosed with mesothelioma and other conditions decades after exposure.